Harley W. Reno holds a B.S. and M.S. and Ph.D. degrees in Zoology (Specialty- sensory anatomy in fishes). He retired after 34 years of professorial duty as a biologist, environmental engineer, and systems engineer, and 25 years of Engineering and environmental duty in the oil, gas, and coal mining industries and nuclear waste management programs of the U.S. Department of Energy. He also spent 50 years guiding all over the United States, in Mexico, and Canada. He still floats and guides, although without remuneration, on rivers throughout the intermontane west.

The Orcky is a biologists take on a crayfish pattern designed to emphasize the elements most attractive to trout.

Recipe:

• Hook: Mustad 32756 or Eagle Claw 570 in sizes 2,4,6, or 8
• Thread: Danville's size A thread in Black, Brown, tan, or Green
• Eyes: Dazl-eyes in black in size 7/32, 3/16, or 5/32
• Antennae: Matched pair of 6 inch long saddle hackles
• Pincers: Two 3 inch long brown saddle hackles
• Tail: three saddle feathers from partridge
• Hackle: Grizzly hackle (Any combo of Green, Grey, Brown); Krystal Flash (in ultraviolet, pearl, gold, copper, or brass)

Download this video now as an HD Download!

Dave was born and raised in Great Falls and has spent his life fishing the waters of southwest Montana. He began his guiding career in 1985 on the Henry’s Fork, the South Fork of the Snake and the Teton in Idaho. In 1995, he moved closer to home when he guided on the famous Montana rivers around Yellowstone Park. In 2001 Dave returned to his home waters of the Missouri, which had been the river that captured his imagination since he first fished it as a youngster in 1971.

Up until the late 80’s, the Missouri River had yet to be discovered by the fishing magazines and the few outfitters that guided there held it as closely guarded secret. Dave has studied and fished it intently his entire angling life. Since this homecoming, he has been guiding on the Missouri in the summer and on the rivers of southern Chile and Argentina in the winter. Dave is also a nationally recognized fly-tier and his patterns are produced and sold by Idylwilde Flies.

You can check out Bloom Outfitters' website and you can contact him at
bloomoutfitting@hotmail.com
or
(406) 868-7794

We would again also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

Recipe:

• Hook: Gamakatsu #5 Saltwater
• Thread: Tan
• Body: clear tubing
• Underbody: Pearl Flashabou
• Wing: Arctic Fox

{Give us a Stumble if you're up for it}

This fly is available as an HD Download.

Willy discovered his passion for fly fishing at the early age of six. Shortly thereafter, he began tying his own flies for trout, salmon steelhead, and shad. Willy found his love of lake fishing early and has continued to fish stillwaters, becoming known far and wide for his expertise and knowledge. He has fished all over northern California, Idaho, and Montana. From famous blue ribbon trout rivers to high mountain lakes and reservoirs, from farm ponds to the big lakes, Willy has guided for over twenty years in Montana and Yellowstone National Park. Willy has continued to develop his fly tying skills and is currently a signature tyer for Brookside Flies out of Denver, Co. He is the Assistant Manager of Montana Troutfitters of Bozeman. He uses any number of Echo fly rods to ply his craft, including our spey and switch rods and is currently working on the new design of Airflo fly lines for special presentation on lakes. Spey casting may be a new approach for lake fishermen in the US, but in Europe it is a common practice allowing for long distant casts from the shoreline.

RECIPE:

• Hook: 1/0 Gamagatsu
• Thread: 3/0 Mono cord
• Body: Larva lace hollow body, color of choice
• Head: Red mono 3/0
• Gills: Flo Orange big fish thread

{Give us a Stumble if you're up for it}

This fly is available as an HD Download.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

This particular pattern will be featured in the Tyers Bench section of Fly Fisherman Magazine. Look for it on store shelves.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Hook: Tiemco 700 #1/0-8
• Thread: White Flat waxed Nylon, White UTC140 for smaller sizes
• Eyes/weight: Lead wire, painted dumbell eyes
• Body: White Marabou, White Fox Tail
• Flash: Silver Flashabou, UV Herring Back Krystal Flash, Black Flashabou
• Sides: Badger Rooster Neck Hackles
• Cement: Zap a Gap.

Dave was born and raised in Great Falls and has spent his life fishing the waters of southwest Montana. He began his guiding career in 1985 on the Henry’s Fork, the South Fork of the Snake and the Teton in Idaho. In 1995, he moved closer to home when he guided on the famous Montana rivers around Yellowstone Park. In 2001 Dave returned to his home waters of the Missouri, which had been the river that captured his imagination since he first fished it as a youngster in 1971.

Up until the late 80’s, the Missouri River had yet to be discovered by the fishing magazines and the few outfitters that guided there held it as closely guarded secret. Dave has studied and fished it intently his entire angling life. Since this homecoming, he has been guiding on the Missouri in the summer and on the rivers of southern Chile and Argentina in the winter. Dave is also a nationally recognized fly-tier and his patterns are produced and sold by Idylwilde Flies.

You can check out Bloom Outfitters' website and you can contact him at
bloomoutfitting@hotmail.com
or
(406) 868-7794

We would again also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

Recipe:

• Hook: Dai Riki #305 #14
• Thread: Rusty Brown
• Shellback: Amber Zelon
• Gastor: Harrop's Rusty Spinner
• Wing: Gold Zelon
• Post: Pink Hi Viz
• Hackle: Brown
• Head: Harrop's Rusty Spinner

Don't Forget to Checkout the DVDs and HD Downloads on our Store!

Rick started flyfishing at the age of six, at an uncle's cabin in Minnesota for bluegill. Flyfishing quickly became a lifetime pursuit in Colorado, with Rick spending a lot of time fishing Colorado's South Platte while he attended Denver University. He then started guiding with mentor Steve Herter at Elk Trout lodge in Colorado, and later in Wyoming, Utah, and Montana. Rick guided Jackson Hole's One Fly for ten years, and also spent many summers guiding on Montana's Bighorn and Yellowstone Rivers. Later, Rick went on to host ESPN's FLY FISHING AMERICA, traveling and fishing extensively around the U.S. Rick has fished for trout, steelhead and salmon all over the world. If Rick has one passion in fishing, it's steelhead fishing with two handed spey rods. Rick is a great fly tier, and his classic spey flies are works of art. In the winter he works on the ski hills and in the summers he works at at George Anderson's Yellowstone Angler.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Hook: 2487 Tiemco Hook
• Thread: 8/O uni thread
• Body: Olive Goose Biot
• Rib: Peacock Krystal Flash
• Thorax: Olive Beaver Dubbing

{Give us a Stumble if you're up for it}

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Hook: #6-10 2xl nymph hook
• Thread: UTC 140 Hopper Yellow
• Body: Rainy's Crosslink foam 4mm, cream or tan
• Legs: Rainy's Barred Rubber legs, tan or Yellow
• Wingcase: Tan opaque Razor foam
• Wing: Tan Neer Hair, or Antron yarn

Rick started flyfishing at the age of six, at an uncle's cabin in Minnesota for bluegill. Flyfishing quickly became a lifetime pursuit in Colorado, with Rick spending a lot of time fishing Colorado's South Platte while he attended Denver University. He then started guiding with mentor Steve Herter at Elk Trout lodge in Colorado, and later in Wyoming, Utah, and Montana. Rick guided Jackson Hole's One Fly for ten years, and also spent many summers guiding on Montana's Bighorn and Yellowstone Rivers. Later, Rick went on to host ESPN's FLY FISHING AMERICA, traveling and fishing extensively around the U.S. Rick has fished for trout, steelhead and salmon all over the world. If Rick has one passion in fishing, it's steelhead fishing with two handed spey rods. Rick is a great fly tier, and his classic spey flies are works of art. In the winter he works on the ski hills and in the summers he works at at George Anderson's Yellowstone Angler.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• 8/O Olive thread
• 200r Tiemco Hook
• Scud Back 1/8 inch tan
• Insect Green Beaver Dubbing
• Gold Wire
• Pheasant tail Tippets
• Rust Colored Beaver Dubbing

This video is available as an HD Download

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Hook: Std. Saltwater #1/0-8
• Thread: UTC 140 color to suit
• Tail: Tan craft fur or Polar fiber, orange pearl crystal flash
• Antennae: Long strands of Black Pearl crystal flash, white spanflex colored with pink, tan sharpie markers
• Eyes: Shrimp/crab eyes
• Claws: Pair of rooster neck hackles
• Hackle: large rooster neck hackle for collar
• Body: Antron crystal chenille, tan

Rick started flyfishing at the age of six, at an uncle's cabin in Minnesota for bluegill. Flyfishing quickly became a lifetime pursuit in Colorado, with Rick spending a lot of time fishing Colorado's South Platte while he attended Denver University. He then started guiding with mentor Steve Herter at Elk Trout lodge in Colorado, and later in Wyoming, Utah, and Montana. Rick guided Jackson Hole's One Fly for ten years, and also spent many summers guiding on Montana's Bighorn and Yellowstone Rivers. Later, Rick went on to host ESPN's FLY FISHING AMERICA, traveling and fishing extensively around the U.S. Rick has fished for trout, steelhead and salmon all over the world. If Rick has one passion in fishing, it's steelhead fishing with two handed spey rods. Rick is a great fly tier, and his classic spey flies are works of art. In the winter he works on the ski hills and in the summers he works at at George Anderson's Yellowstone Angler.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Hook: TMC 200r #20, #22
• Thread: Yellow 8/0
• Underbody: Glow in the Dark Flashabou
• Body: Tan Ultra tubing

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

We would also like to thank the Federation of Fly Fishers for allowing us to film in their beautiful library. If you aren't a member of FFF, please take a look at their site and see what they are all about.

RECIPE:

• Bead: Black Brass eye
• Hook: #6-12 2XL nymph hook
• Thread: UTC140 color to suit
• Tail: Burnt Orange and Brown Marabou, single strand of flashabou
• Body: Gold Variant Rabbit fur from the hide twisted into a dubbing loop

(NOTE: For those of you joining us from flytyer.wordpress.com please see the following post about our Free High Definition downloads offer. And thanks for dropping by.)

From Marc:

I learned to fish like the kids in the great movie "A River Runs Through It": Nearly 35 yearsMarc Petitjean ago - when I was a seven year old boy - my grandfather took me fishing for the first time . In France where we lived. I was allowed to catch little baitfish. Some years later - and with stronger arms - I caught my first trout and I remember it like yesterday. - The rod was 4 meters long, made out of Bamboo and the bait was a natural may-fly (Ephemera danica, imago) which had to be handled as carefully as a snow-flake. My first experiences of fly-fishing used an old split-cane rod of my grandfather and an even older line which had to be greased every five or ten casts! This was not a very efficient way to catch fish, but I learned a lot! In Switzerland, where I moved in 1978, I had my first contact with a cdc-fly. It was at a dinner among fishermen when my friend Bruno - who had poor eyesight - asked me to tie him a visible fly which floated nicely. Because I was very proud of that request and did not want to lose face I began a study of local cdc-flies. Those patterns used cdc-hackles, no wings and classical bodies made of silk or other materials. Worried, not wanting to copy those local flies, I developed a new concept of also tying the body with a cdc-feather: This product a perfect conical body, which floated even in riffles and rapids. Bruno and later many more fishermen in Europe, were very pleased with the simple but efficient new way to tie a fly. I have been a professional fly-tier since 1990 and today more and more anglers are convinced that those tiny and inconspicuous feathers are the best a fly fisherman can have wrapped around a hook: They are good for dry-flies, for emergers, for nymphs, for streamers and even for salmon flies or saltwater-patterns. I love them and think you will too!

This pattern was pulled from one of three upcoming DVDs from Bob. In this DVD he talks about and demonstrates his favorite patterns for the Yellowstone region in which he has made his living for the past 40 years. Check out our Video Store for availability!

Bob Jacklin (www.jacklinsflyshop.com) has been a fly fishing guide and outfitter in the Yellowstone region for over 37 years. He is a world class fly fisherman, fly tyer, and fly casting instructor. Bob holds a Masters Certification as a fly casting instructor, and sits on the FFF’s Board of Governors for fly casting instruction. He has been tying flies commercially since 1963 and is a past recipient of the FFF’s Buz Buszek award for his contributions to the art of fly tying. There are few people in the country with as much in-depth knowledge of fly fishing, fly casting, and fly tying as Bob Jacklin. He is a charter member of the Federation of Fly Fishers, on the pro staff for St. Croix Rods, Ross Reels, Cortland Lines, and Whiting Farms. He is also a contract fly tyer for Umpqua Feather Merchants. On October 23, 2004, at the Catskill Fly Fishing Center and Museum, Bob Jacklin was inducted into the very prestigious “Fly Fishing Hall of Fame”

Bob is a frequent participant at fly tying shows as well as putting on talks and demonstrations for smaller groups.

Now sit back and enjoy both the fly tying and story telling skills of Bob Jacklin. See the recipe below the video.

Bob has also tied Many Other Patterns for us. Take a look!

Don't forget to Register!

Or you can subscribe to our RSS feed and get updated every week automatically!

This pattern was pulled from one of three upcoming DVDs from Bob. In this DVD he discusses the history of 6 classic patterns as well as demonstrating how to tie these famous patterns using available materials. Check out our Video Store for availability!

Bob Jacklin (www.jacklinsflyshop.com) has been a fly fishing guide and outfitter in the Yellowstone region for over 37 years. He is a world class fly fisherman, fly tyer, and fly casting instructor. Bob holds a Masters Certification as a fly casting instructor, and sits on the FFF’s Board of Governors for fly casting instruction. He has been tying flies commercially since 1963 and is a past recipient of the FFF’s Buz Buszek award for his contributions to the art of fly tying. There are few people in the country with as much in-depth knowledge of fly fishing, fly casting, and fly tying as Bob Jacklin. He is a charter member of the Federation of Fly Fishers, on the pro staff for St. Croix Rods, Ross Reels, Cortland Lines, and Whiting Farms. He is also a contract fly tyer for Umpqua Feather Merchants. On October 23, 2004, at the Catskill Fly Fishing Center and Museum, Bob Jacklin was inducted into the very prestigious “Fly Fishing Hall of Fame”

Bob is a frequent participant at fly tying shows as well as putting on talks and demonstrations for smaller groups.

Now sit back and enjoy both the fly tying and story telling skills of Bob Jacklin. See the recipe below the video.

Bob has also tied Many Other Patterns for us. Take a look!

Don't forget to Register!

Or you can subscribe to our RSS feed and get updated every week automatically!

From Branden

My name is Branden Tueller and I currently reside in the beautiful Wood River Valley (Sun
Valley, Idaho). I have been tying flies for about 15 years, and have been a demonstration tyer at
the East Idaho Fly Tying & Fishing Expo for the past 4 years. I am also a member of the
Federation of Fly Fishers.

My passion is to design & create durable, innovative, and fishable flies, I enjoy teaching &
demonstrating at all levels, from beginners to advanced Art Flies. I have taken a special interest
in weaving the past few years and enjoy incorporating it in many patterns.

RECIPE to Come...

From Branden

My name is Branden Tueller and I currently reside in the beautiful Wood River Valley (Sun
Valley, Idaho). I have been tying flies for about 15 years, and have been a demonstration tyer at
the East Idaho Fly Tying & Fishing Expo for the past 4 years. I am also a member of the
Federation of Fly Fishers.

My passion is to design & create durable, innovative, and fishable flies, I enjoy teaching &
demonstrating at all levels, from beginners to advanced Art Flies. I have taken a special interest
in weaving the past few years and enjoy incorporating it in many patterns.

RECIPE to Come...

From Charles:

I have been tying stuff onto hooks for a long time. It began with poppers and jig heads, which served the fishing I was taught to do by my father. By the age of twelve I was approaching burn out from fishing the warm water mud pit impoundments of central Arkansas. Dear ol` Dad saved me, though, when he took me on a float trip on the White River in northern Arkansas. It has taken all the years since to get enough fur and feather into my bloodstream to achieve the level of addiction I now have for fly fishing, and tying. I justify my habit by tying at conclaves and other events, from coast to coast. I am proud to be a Proteam member for Whiting Farms and on the Pro Staff for Daiichi. It is always good to use the best. I own and operate Tanfly, LLC from my home in Little Rock.
Have fun and tie one on for me!

Also: It catches everything and anything, salt and fresh. Used a lot for smallmouth bass and large trout.

Recipe:

• Hook: Wapsi Lightning Strike, SN 1, Size 06 - or Mustad R50, Size 04 or 06
• Thread: Match body color
• Cone / Head: Wapsi Tungsten. Medium
• Tail: Part of Pine Squirrel zonker which forms the body.
• Body: Pine squirrel zonker.

Kenly was born on the Snake River in Swan Valley, ID and has fly fished for the past 50 years and tied flies for the past 30 years. His favorite species by far is the mighty Steelhead!

Recipe:

• Hook: Alec Jackson #5
• Thread: Black
• Tail: Golden Pheasant Crest
• Body: Small Purple Chenille
• Wing: Golden Pheasant breast feather
• Hackle: Purple saddle hackle

Randy Says:

I have been tying flies since my wife taught me to tie 38 years ago. I have always been fascinated with woven patterns, in particular those originated by George Grant and Franz Pott.

Recipe:

• Hook: Size 8 Daiichi 1710
• Thread: Brown 6/0 Uni-thread
• Body: Tan or brown horse mane woven with 3 strands of orange embroidery floss. (Emboidery floss has six strands. Separate out three of them for weaving.) When woven in, the floss forms a stripe on the underside of the fly.
• Hackle: Elk Mane woven onto a thread
• Head: Brown 6/0 Uni-thread

NOTE: I realize the spelling error in the titling. Sorry. It was late. I'll fix it.
From Charles:

I have been tying stuff onto hooks for a long time. It began with poppers and jig heads, which served the fishing I was taught to do by my father. By the age of twelve I was approaching burn out from fishing the warm water mud pit impoundments of central Arkansas. Dear ol` Dad saved me, though, when he took me on a float trip on the White River in northern Arkansas. It has taken all the years since to get enough fur and feather into my bloodstream to achieve the level of addiction I now have for fly fishing, and tying. I justify my habit by tying at conclaves and other events, from coast to coast. I am proud to be a Proteam member for Whiting Farms and on the Pro Staff for Daiichi. It is always good to use the best. I own and operate Tanfly, LLC from my home in Little Rock.
Have fun and tie one on for me!

Also: It catches everything and anything, salt and fresh. Used a lot for smallmouth bass and large trout.

Recipe:

• Hook: Daiichi salmon fly hooks size 3/0 down to size 10
• Thread: Clear Mono
• Eyes: Barbell or bead chain (he uses Wapsi "Real Eyes")
• Tag: Holographic Tinsel wound down the hook bend and back up
• Body: Pine squirrel zonker palmered to just behind the eye.
• Collar: Whiting Spey feather, as many wraps as you can get.

Download this video in High Definition!

Kenly was born on the Snake River in Swan Valley, ID and has fly fished for the past 50 years and tied flies for the past 30 years. His favorite species by far is the mighty Steelhead!

Recipe:

• Hook: Alec Jackson #5
• Thread: Black
• Tail: Red Pheasant Crest
• Body: Small Black Chenille
• Wing: Black Pheasant breast feather
• Hackle: Purple saddle hackle

EDIT: Welcome Stumblers! You might be interested in the Free Hi Definition Downloads we are giving away. There are three tyers we are highlighting on our store for our 101st post!

Until relatively recently Rocky was a inveterate cowboy. A few years ago an injury sidelined him and he eventually found his way to fly tying to pass the time. He's since become an incredible fly tyer and is an officer of the Central Oregon Fly Tyers Guild.

Recipe:

• Tag: Silver twist
• Tail: Ted breast feather from the golden pheasant
• Body: Yellow, light blue, and scarlet seal's fur
• Ribs: Silver lace and silver tinsel
• Hackle: Gray eagle, from blue fur ( substitute marabou)
• Throat: Widgeon ( teal for large patterns)
• Wings: Two strips of brown mottled turkey, with black bars and white points

For more patterns from Rocky browse by Tyer or click here.

Randy Says:

I have been tying flies since my wife taught me to tie 38 years ago. I have always been fascinated with woven patterns, in particular those originated by George Grant and Franz Pott.

Recipe:

• Hook: Size 8 Daiichi 1750
• Thread: Brown 6/0 Uni-thread
• Body: Tan or brown horse mane woven with 3 strands of orange embroidery floss. (Emboidery floss has six strands. Separate out three of them for weaving.) When woven in, the floss forms a stripe on the top of the hook shank.
• Wing: Two clumps of Elk mane tied in on the sides like pontoons, angled slightly down.
• Head: Brown 6/0 Uni-thread
• Hackle: High-quality dry brown rooster neck or saddle, wound and clipped on bottom. (The bottom is actually the top of the hook shank because this is an inverted pattern made to skate with the hook point facing up.)

From Charles:

I have been tying stuff onto hooks for a long time. It began with poppers and jig heads, which served the fishing I was taught to do by my father. By the age of twelve I was approaching burn out from fishing the warm water mud pit impoundments of central Arkansas. Dear ol` Dad saved me, though, when he took me on a float trip on the White River in northern Arkansas. It has taken all the years since to get enough fur and feather into my bloodstream to achieve the level of addiction I now have for fly fishing, and tying. I justify my habit by tying at conclaves and other events, from coast to coast. I am proud to be a Proteam member for Whiting Farms and on the Pro Staff for Daiichi. It is always good to use the best. I own and operate Tanfly, LLC from my home in Little Rock.
Have fun and tie one on for me!

Recipe:

• Hook: Daiichi 2143, size 1(red straight bend back eye salmon hook)
• Thread: Clear Mono
• Tag: Holographic Tinsel wound deeply onto the bend and back
• Body: Three separate Whiting Farms spey hackles, wound on from the tag forward. Colors can vary but the last feather (the veil) should always dark to produce a dark silhouette.

Kenly was born on the Snake River in Swan Valley, ID and has fly fished for the past 50 years and tied flies for the past 30 years. His favorite species by far is the might Steelhead!

Recipe:

• Hook: Alec Jackson #5
• Thread: Black
• Body: Silver Doctor Blue Crystal Chenille
• Wing: Black Golden Pheasant breast feather
• Hackle: Blue peacock breast feather; Purple saddle hackle

Until relatively recently Rocky was a inveterate cowboy. A few years ago an injury sidelined him and he eventually found his way to fly tying to pass the time. He's since become an incredible fly tyer and is an officer of the Central Oregon Fly Tyers Guild.

Recipe:

• Hook: AJ 3
• Thread: utc 140 white
• Tip: blue oval tinsel
• Tag: JC orange silk
• Butt: black ostrich hurl
• Rib: flat silver
• Body: burnt orange silk
• Collar: long orange hackle
• Wing: married strips of orange, black and orange turkey tail in order
• Head: orange

This video is available as an HD DOWNLOAD from our store!
From Chris:

With regards to fly tying and fishing, I have done both since I was 9-years-old. Even with my rather limited math skills, I believe that translates to 40 years experience. Although I do fish and tie nymphs, my true passion is for dry fly-fishing, especially of the very small variety. Favorite hatches involve fishing baetis, midges, and tricos. I look upon fly-tying as a continually evolving process with new materials and new twists on old ties and methods emerging all of the time. My philosophy as a fly-tier is that tying is really a way of problem-solving. I spend a great deal of time on streams and lakes with much time being spent simply as an observer of entomology and nature. I try to come up with patterns that fit different situations, try to be innovative in the creation of flies to solve different problems, and I also try to learn from other individuals in order to be a better tier and fisherman.
While I certainly would not consider myself a famous tier or fly fisherman, I have been demonstrating fly-tying at expos (including the tremendous East Idaho Expo), fly club meetings, for community groups, and in shops for about the last eight years. Some of my flies have also been featured in Fly Fish America, and I am currently a member of Whiting's Pro Team. Also, I am currently producing a line of dry fly and emerger patterns that will be marketed by Riverborn Flies in 2010.
Over the years, I have been helped by many people to improve my skills as a tier and fly fisherman, and to those folks I owe a great debt of gratitude. I truly love this sport and as I grow to be a mature member of the fly tying and fishing community, it is one of my goals to pass on a little of the knowledge I have accumulated over the years.

RECIPE:

• Hook: Gamakatsu 1/0 or 2/0 jig hook
• Thread: red UTC 140
• Bead: large tungsten cone followed by a 3/16” tungsten bead
• Eyes: yellow doll eyes super-glued to cone
• Body: orange crinkled flashabou wrapped and then pulled back and tied down for more flash. Then add some black flashabou strands as well.
• Belly: Dyed black-barred muddler brown bunny strip.
• Over body: One black-barred white marabou blood quill feather under a black-barred brown marabou blood quill
• Collar: Black-barred bunny strip wrapped and stroked back
• Gills: red barred marabou

View several other of Chris Williams Patterns too.

This video is available as an HD DOWNLOAD from our store!

Dan Delekta started Fly fishing when he was ten years old, encouraged by his dad, who owned sporting goods stores in upstate New York. Dan grew up fishing in the Adirondack Mountains. His passion for trout and steelhead fly fishing eventually led him far from New York, to Montana, Idaho, Wyoming, Washington, Oregon, and British Columbia. He moved to West Yellowstone at age 22.

Dan began tying flies when he was ten years old. He has designed over 200 patterns of flies that are the trademark Delektable™ collection utilizing both traditional and new age materials. His fly patterns are now tied by Riverborn Fly Company in Boise Idaho and supplied nationally. His passion for fly tying is as strong now as it has ever been. He is constantly thinking about, designing, tying, and field testing his new designs in the great Madison River just outside his door and other rivers he guides including the Big Hole, Beaverhead, Ruby, Missouri, Stillwater, Yellowstone, and Big Horn Rivers. Dan loves to make stuff and started building rods in 1975. He now constructs custom graphite, fiberglass, and bamboo rods at the shop. He started Beartooth Flyfishing in 1982, constructing Made in Montana braided leaders, hand-tied leaders, and fly rods.

Dan has access to an apartment, car, and flats boat on Andros Island in the Bahamas. He spends a good amount of winter time fishing the salt for Bonefish and many other saltwater species. He has an opportunity to design and test his saltwater patterns while on Andros Island.

Dan has guided in Montana’s trophy rivers for over 25 years. He built the Beartooth Flyfishing lodge in 1989, with the help of friends. He greatly values the friendships he has built over the years. His love of the mountains, the solitude, and the peace is exceeded by his appreciation of all the people who have treated him like family. Dan loves fly fishing and all the challenges and rewards it brings. He looks forward to continuing to innovate, to being in touch with nature, and to continuing to bring the joys of fly fishing and deeper knowledge of fly fishing to even more people.

RECIPE

• Hook: Gamakatsu #SL11-3H in sizes #2, #4, #6, #8
• Thread: Pink 3/0 Uni-thread
• Eyes: For sizes #6 and #8 size small silver bead chain eyes; size #4 Medium Silver bead chain eyes; size #2 Real Eyes plus 5/32” Nickel/Red. All eyes to be super glued to Hook Shank.
• Tail: Six strands of Krystal flash in bonefish tan.
• Body: Same as tail, wrapped and glued with Krazy Glue
• Wing: Under wing six strands of Krystal Flash Bonefish Tan with Ice Fur Camel Tan and Ice Fur Pink Bonefish Wing with a topping of six sili legs nymph size in pumpkin solid color
• Head: Dubbed Pink Highlight Dubbing. Drop of super glue before winding dubbed head.

Watch More of Dan's Patterns!

This pattern is available as an HD DOWNLOAD from our store!
From Chris:

With regards to fly tying and fishing, I have done both since I was 9-years-old. Even with my rather limited math skills, I believe that translates to 40 years experience. Although I do fish and tie nymphs, my true passion is for dry fly-fishing, especially of the very small variety. Favorite hatches involve fishing baetis, midges, and tricos. I look upon fly-tying as a continually evolving process with new materials and new twists on old ties and methods emerging all of the time. My philosophy as a fly-tier is that tying is really a way of problem-solving. I spend a great deal of time on streams and lakes with much time being spent simply as an observer of entomology and nature. I try to come up with patterns that fit different situations, try to be innovative in the creation of flies to solve different problems, and I also try to learn from other individuals in order to be a better tier and fisherman.
While I certainly would not consider myself a famous tier or fly fisherman, I have been demonstrating fly-tying at expos (including the tremendous East Idaho Expo), fly club meetings, for community groups, and in shops for about the last eight years. Some of my flies have also been featured in Fly Fish America, and I am currently a member of Whiting's Pro Team. Also, I am currently producing a line of dry fly and emerger patterns that will be marketed by Riverborn Flies in 2010.
Over the years, I have been helped by many people to improve my skills as a tier and fly fisherman, and to those folks I owe a great debt of gratitude. I truly love this sport and as I grow to be a mature member of the fly tying and fishing community, it is one of my goals to pass on a little of the knowledge I have accumulated over the years.

RECIPE:

• Hook: TMC 102Y #21, or TMC 2488 #20-30
• Thread: black UTC 70
• Tail: Callibaetis colored antron dubbing shuck
• Body: black Flashabou
• Thorax: peacock eye fibers
• Wing: dun or tan poly twisted and tied in a loop
• Legs: Whiting midge grizzly, speckled badger, or dun palmered through the peacock

View several other of Chris Williams Patterns too.

From Al:

I grew up in Michigan and have fished as long as I can remember. After graduating college, I moved to California and gravitated toward fly fishing almost exclusively. I have been tying “seriously” since 1983 and have been a tying instructor both independently and for several Colorado fly shops since 2000. In 2005 I also began guiding along Colorado’s front range. Currently I am a member of Whiting Farms Pro Staff and am employed by PEAK Fishing and I have several fly patterns commercially available. In addition to guiding, tying instruction and demos, my wife Diana and I own and operate our own company geared primarily toward flyfishing education services. More detailed information is available at www.alrittflies.com.

RECIPE:

• Hook: Tiemco 2488
• Thread: UTC 70 Denier
• Tail: Byed and Barred Braided Leader Butt (Available from Hareline Dubbin’ as “Adult Damsel Body”)
• Thorax: Super Fine Dubbing
• Wing: Organza
• Foam Back: Narrow strip of 2mm Closed Cell Foam, majority of length split so foam is 2 narrow legs joined at one end
• Spot/Post: ParaPost Yarn

Dan Delekta started Fly fishing when he was ten years old, encouraged by his dad, who owned sporting goods stores in upstate New York. Dan grew up fishing in the Adirondack Mountains. His passion for trout and steelhead fly fishing eventually led him far from New York, to Montana, Idaho, Wyoming, Washington, Oregon, and British Columbia. He moved to West Yellowstone at age 22.

Dan began tying flies when he was ten years old. He has designed over 200 patterns of flies that are the trademark Delektable™ collection utilizing both traditional and new age materials. His fly patterns are now tied by Riverborn Fly Company in Boise Idaho and supplied nationally. His passion for fly tying is as strong now as it has ever been. He is constantly thinking about, designing, tying, and field testing his new designs in the great Madison River just outside his door and other rivers he guides including the Big Hole, Beaverhead, Ruby, Missouri, Stillwater, Yellowstone, and Big Horn Rivers. Dan loves to make stuff and started building rods in 1975. He now constructs custom graphite, fiberglass, and bamboo rods at the shop. He started Beartooth Flyfishing in 1982, constructing Made in Montana braided leaders, hand-tied leaders, and fly rods.

Dan has access to an apartment, car, and flats boat on Andros Island in the Bahamas. He spends a good amount of winter time fishing the salt for Bonefish and many other saltwater species. He has an opportunity to design and test his saltwater patterns while on Andros Island.

Dan has guided in Montana’s trophy rivers for over 25 years. He built the Beartooth Flyfishing lodge in 1989, with the help of friends. He greatly values the friendships he has built over the years. His love of the mountains, the solitude, and the peace is exceeded by his appreciation of all the people who have treated him like family. Dan loves fly fishing and all the challenges and rewards it brings. He looks forward to continuing to innovate, to being in touch with nature, and to continuing to bring the joys of fly fishing and deeper knowledge of fly fishing to even more people.

RECIPE

• Hook: Nymph Hook 2XH, 2XL in sizes #14, #16, and #18
• Thread: Red 6/0 Danville
• Bead Head: Silver Color in 3/32 size for sizes #14 and #16; 5/64 for #18 and #20
• Tail: 8 Fibers of Mallard Flank dyed Medium Dun Color
• Body: Holographic Red Tinsel Medium size super glued down; Do-Not get the glue on the tail.
• Ribbing: Silver Fine Wire ribbed in the same direction as the body.
• Thorax: Ice Dub UV Gray
• Wing case and legs: Midge flash in the light blue dun color 8 strands pulled over thorax and then split into four strands; then tied back and cut to length of body.
• Hackle: CDC Natural Dun 2 or 2 _ turns on sparse side.
• Head: Hares’ Ear plus Dubbin Dark Hare’s Ear Color

Watch More of Dan's Patterns!

Boots Allen is a third generation guide and outfitter from Western Wyoming. Over the last 18 years, he has had the opportunity to fish and guide at destinations around the world, including Argentina, Russia, Mongolia, Kazakhstan, Costa Rica, British Columbia, and the streams of the Rocky Mountain West. He has penned numerous articles for fly fishing magazines such as Fly Tyer, The Fly Fishing and Tying Journal, The Drake, and Sports Afield. Boots has used his creations at the fly tying vise for a variety of game fish including taimen, pike, lenok, sea-run brown trout, steelhead, pacific salmon, snook, roosterfish, redfish, and almost every imaginable species of trout.

Recipe
This video is now available as an HD DOWNLOAD!

• Hook: Dai Riki 135, Size 10
• Thread: Tan 6/0
• Wing: Sand-colored EP Silky Fibers
• Shuck: Small tan Tentacle Legs
• Abdomen: Tying thread (coated with Zap-A-Gap)
• Ribbing: Brown, flat wax tying thread (Coated with Zap-A-Gap)
• Legs: Tan or clear Tentacle Legs
• Wing Support: Tan 2mm foam
• Hackle: Brown
• Thorax and head: Cream or tan dubbing

EDIT: If you like Kelly's tying you might be interested in the Free Hi Definition Downloads we are giving away. He is one of the three tyers we are highlighting on our store for our 101st post!

Kelly has been a fly fishing guide for 27 years. He started guiding in Michigan at the age of 16. He started his fly shop The Troutsman in Traverse City, Michigan, in 1981. He continued to run The Troutsman until the spring of 2002 when he moved to Montana. He is an author and lecturer. His books are Modern Streamers for Trophy Trout (co-authored with Bob Linsenman) and Cripples and Spinners. Kelly has been published by virtually every major magazine in the business and is Editor-at-Large for Fly Fisherman Magazine. Kelly is also one of the hosts of Fly Fish TV on the Outdoor Life Network.

Recipe:

• Hook: #2-6 3x Streamer
• Thread: GSP200
• Tail: Marabou Yellow
• Body: Small Chrystaline Chenille
• UnderWing: Underwing calftail
• Overwing: Mallard Flank dyed yellow
• Head and Collar: Yellow Dear Hair

This video is available as an HD DOWNLOAD at our store!
From Chris:

With regards to fly tying and fishing, I have done both since I was 9-years-old. Even with my rather limited math skills, I believe that translates to 40 years experience. Although I do fish and tie nymphs, my true passion is for dry fly-fishing, especially of the very small variety. Favorite hatches involve fishing baetis, midges, and tricos. I look upon fly-tying as a continually evolving process with new materials and new twists on old ties and methods emerging all of the time. My philosophy as a fly-tier is that tying is really a way of problem-solving. I spend a great deal of time on streams and lakes with much time being spent simply as an observer of entomology and nature. I try to come up with patterns that fit different situations, try to be innovative in the creation of flies to solve different problems, and I also try to learn from other individuals in order to be a better tier and fisherman.
While I certainly would not consider myself a famous tier or fly fisherman, I have been demonstrating fly-tying at expos (including the tremendous East Idaho Expo), fly club meetings, for community groups, and in shops for about the last eight years. Some of my flies have also been featured in Fly Fish America, and I am currently a member of Whiting's Pro Team. Also, I am currently producing a line of dry fly and emerger patterns that will be marketed by Riverborn Flies in 2010.
Over the years, I have been helped by many people to improve my skills as a tier and fly fisherman, and to those folks I owe a great debt of gratitude. I truly love this sport and as I grow to be a mature member of the fly tying and fishing community, it is one of my goals to pass on a little of the knowledge I have accumulated over the years.

RECIPE:

• Hook: TMC 2488 #12 or Partridge Klinkhammer #14
• Thread: UTC 70 olive
• Tail: March Brown antron dubbing shuck
• Body: Underbody of Olive Superfine Dubbing, and overbody of Blue-Wing Olive turkey biot tied with a furled body
• Thorax: Olive Superfine Dubbing with a translucent grey Razorfoam wingcase
• Wing: matched CDC wings pulled through the wingcase
• Legs: 1 or 2 wraps Whiting speckled badger hackle clipped into a V underneath

From Al:

I grew up in Michigan and have fished as long as I can remember. After graduating college, I moved to California and gravitated toward fly fishing almost exclusively. I have been tying “seriously” since 1983 and have been a tying instructor both independently and for several Colorado fly shops since 2000. In 2005 I also began guiding along Colorado’s front range. Currently I am a member of Whiting Farms Pro Staff and am employed by PEAK Fishing and I have several fly patterns commercially available. In addition to guiding, tying instruction and demos, my wife Diana and I own and operate our own company geared primarily toward flyfishing education services. More detailed information is available at www.alrittflies.com.

RECIPE:

• Hook: Tiemco 100 or 101
• Thread: UTC 70 Denier
• Body: Yellow Super Fine Dubbing
• Thorax: Yellow Super Fine Dubbing
• Wing: White (winter phase) hair from the bottom of a snowshoe hare’s hind foot
• Egg Sack: Red Foam
• Trailing Bubbles: 2 strands of Mirage Opal Flash
• Rib: Yellow Dyed Grizzly Hackle, palmered through body and trimmed short
• Under Wing: Mirage Opal Flash
• Spot: Red Foam
• Hackle: Light Barred Ginger dry fly hackle

Boots Allen is a third generation guide and outfitter from Western Wyoming. Over the last 18 years, he has had the opportunity to fish and guide at destinations around the world, including Argentina, Russia, Mongolia, Kazakhstan, Costa Rica, British Columbia, and the streams of the Rocky Mountain West. He has penned numerous articles for fly fishing magazines such as Fly Tyer, The Fly Fishing and Tying Journal, The Drake, and Sports Afield. Boots has used his creations at the fly tying vise for a variety of game fish including taimen, pike, lenok, sea-run brown trout, steelhead, pacific salmon, snook, roosterfish, redfish, and almost every imaginable species of trout.

Recipe

• Hook: Mustad 34011, size 4 to size 2/0
• Thread: Black 3/0
• Tail: Strip of antelope hide colored black
• Shellback: Two strips of black and white, two-tone, 2mm foam
• Body: Black Ice chenille
• Legs: Four strips of black rubber, knotted to form knee and ankle joints

EDIT: If you like Kelly's tying you might be interested in the Free Hi Definition Downloads we are giving away. He is one of the three tyers we are highlighting on our store for our 101st post!

Kelly has been a fly fishing guide for 27 years. He started guiding in Michigan at the age of 16. He started his fly shop The Troutsman in Traverse City, Michigan, in 1981. He continued to run The Troutsman until the spring of 2002 when he moved to Montana. He is an author and lecturer. His books are Modern Streamers for Trophy Trout (co-authored with Bob Linsenman) and Cripples and Spinners. Kelly has been published by virtually every major magazine in the business and is Editor-at-Large for Fly Fisherman Magazine. Kelly is also one of the hosts of Fly Fish TV on the Outdoor Life Network.

Recipe:

• Hook: 12-18 Standard Dry
• Thread: 50 GSD
• Body: Cinnamon Brown Cinnamon Superfine.
• Wing: Underwing Gold Metallic Braid; Overwing Natural Deer
• Legs: Round Rubber - small

Dan Delekta started Fly fishing when he was ten years old, encouraged by his dad, who owned sporting goods stores in upstate New York. Dan grew up fishing in the Adirondack Mountains. His passion for trout and steelhead fly fishing eventually led him far from New York, to Montana, Idaho, Wyoming, Washington, Oregon, and British Columbia. He moved to West Yellowstone at age 22.

Dan began tying flies when he was ten years old. He has designed over 200 patterns of flies that are the trademark Delektable™ collection utilizing both traditional and new age materials. His fly patterns are now tied by Riverborn Fly Company in Boise Idaho and supplied nationally. His passion for fly tying is as strong now as it has ever been. He is constantly thinking about, designing, tying, and field testing his new designs in the great Madison River just outside his door and other rivers he guides including the Big Hole, Beaverhead, Ruby, Missouri, Stillwater, Yellowstone, and Big Horn Rivers. Dan loves to make stuff and started building rods in 1975. He now constructs custom graphite, fiberglass, and bamboo rods at the shop. He started Beartooth Flyfishing in 1982, constructing Made in Montana braided leaders, hand-tied leaders, and fly rods.

Dan has access to an apartment, car, and flats boat on Andros Island in the Bahamas. He spends a good amount of winter time fishing the salt for Bonefish and many other saltwater species. He has an opportunity to design and test his saltwater patterns while on Andros Island.

Dan has guided in Montana’s trophy rivers for over 25 years. He built the Beartooth Flyfishing lodge in 1989, with the help of friends. He greatly values the friendships he has built over the years. His love of the mountains, the solitude, and the peace is exceeded by his appreciation of all the people who have treated him like family. Dan loves fly fishing and all the challenges and rewards it brings. He looks forward to continuing to innovate, to being in touch with nature, and to continuing to bring the joys of fly fishing and deeper knowledge of fly fishing to even more people.

RECIPE

• Hook: Std. Dry Fly; sizes #14, #16, #18
• Thread: 6/0 Brown Danville
• Body: Ice Dub UV Cinnamon
• Hackle: Whiting Brown Furnace
• Rib: Fine Gold Wire
• Under wing: CDC Dun (Gray) color tied full
• Over wing: Light Bull Elk
• Legs: Sili legs Nymph size Brown Solid
• Head: Dubbed head to match body color

Watch More of Dan's Patterns!

From Al:

I grew up in Michigan and have fished as long as I can remember. After graduating college, I moved to California and gravitated toward fly fishing almost exclusively. I have been tying “seriously” since 1983 and have been a tying instructor both independently and for several Colorado fly shops since 2000. In 2005 I also began guiding along Colorado’s front range. Currently I am a member of Whiting Farms Pro Staff and am employed by PEAK Fishing and I have several fly patterns commercially available. In addition to guiding, tying instruction and demos, my wife Diana and I own and operate our own company geared primarily toward flyfishing education services. More detailed information is available at www.alrittflies.com.

RECIPE:

• Hook: Dai-Riki 700B
• Thread: UTC 70 Denier
• Eyes: Black Round Rubber
• Body: Whitlock Crawdub SLF Dubbing
• Legs: Saddle Hackle palmered through body and brushed out Dubbing
• Weight: Lead Dumbell Eyes
• Antennea: Crystal Flash
• Carapace: Thin Skin
• Claws: Foam Claws Mounted on Round Rubber Arms
• Underbody: Yarn
• Rib: Ultra Wire

This video is available as an HD DOWNLOAD from our store!
From Chris:

With regards to fly tying and fishing, I have done both since I was 9-years-old. Even with my rather limited math skills, I believe that translates to 40 years experience. Although I do fish and tie nymphs, my true passion is for dry fly-fishing, especially of the very small variety. Favorite hatches involve fishing baetis, midges, and tricos. I look upon fly-tying as a continually evolving process with new materials and new twists on old ties and methods emerging all of the time. My philosophy as a fly-tier is that tying is really a way of problem-solving. I spend a great deal of time on streams and lakes with much time being spent simply as an observer of entomology and nature. I try to come up with patterns that fit different situations, try to be innovative in the creation of flies to solve different problems, and I also try to learn from other individuals in order to be a better tier and fisherman.
While I certainly would not consider myself a famous tier or fly fisherman, I have been demonstrating fly-tying at expos (including the tremendous East Idaho Expo), fly club meetings, for community groups, and in shops for about the last eight years. Some of my flies have also been featured in Fly Fish America, and I am currently a member of Whiting's Pro Team. Also, I am currently producing a line of dry fly and emerger patterns that will be marketed by Riverborn Flies in 2010.
Over the years, I have been helped by many people to improve my skills as a tier and fly fisherman, and to those folks I owe a great debt of gratitude. I truly love this sport and as I grow to be a mature member of the fly tying and fishing community, it is one of my goals to pass on a little of the knowledge I have accumulated over the years.

RECIPE:

• Hook: TMC 2488 sizes 14-18
• Thread: yellow UTC 70
• Tail: March Brown colored antron dubbing shuck
• Body: PMD turkey biot tied with a furled body
• Thorax: PMD colored Superfine dubbing
• Wing: CDC puff tied in by the tips of the feather fibers
• Legs: Whiting medium dun hackle parachuted around the CDC wing

Boots Allen is a third generation guide and outfitter from Western Wyoming. Over the last 18 years, he has had the opportunity to fish and guide at destinations around the world, including Argentina, Russia, Mongolia, Kazakhstan, Costa Rica, British Columbia, and the streams of the Rocky Mountain West. He has penned numerous articles for fly fishing magazines such as Fly Tyer, The Fly Fishing and Tying Journal, The Drake, and Sports Afield. Boots has used his creations at the fly tying vise for a variety of game fish including taimen, pike, lenok, sea-run brown trout, steelhead, pacific salmon, snook, roosterfish, redfish, and almost every imaginable species of trout.

Recipe:

• Hook: Dai-Riki 135, Size 8-12
• Thread: Clear, fine monochord
• Eyes: Black dumbbell eyes, size to match hook
• Antennae: Pearlescent Silli Legs
• Body: Pearl Diamond Braid
• Hackle: White
• Shellback: White or tan Scud Skin
• Ribbing: Fine black wire

Also see other flies by Boots.

From Al:

I grew up in Michigan and have fished as long as I can remember. After graduating college, I moved to California and gravitated toward fly fishing almost exclusively. I have been tying “seriously” since 1983 and have been a tying instructor both independently and for several Colorado fly shops since 2000. In 2005 I also began guiding along Colorado’s front range. Currently I am a member of Whiting Farms Pro Staff and am employed by PEAK Fishing and I have several fly patterns commercially available. In addition to guiding, tying instruction and demos, my wife Diana and I own and operate our own company geared primarily toward flyfishing education services. More detailed information is available at www.alrittflies.com.

RECIPE:

• Hook: Tiemco 3761
• Thread: UTC 70 Denier
• Eyes: Black Mono Eyes
• Tail: Sparse Tail of Marabou fibers with one strand of Mirage Opal Flash on each side
• Body: A second bundle of marabou fibers equal to the tail, or the butts of the marabou tail fibers
• Thorax: Extension of Body
• Head: Extension of Body and Thorax
• Rib: Mirage Opal Flash
• Wing Bud: Mixed bundle of Antron and Mirage Opal Flash

EDIT: If you like Kelly's tying you might be interested in the Free Hi Definition Downloads we are giving away. He is one of the three tyers we are highlighting on our store for our 101st post!

Kelly has been a fly fishing guide for 27 years. He started guiding in Michigan at the age of 16. He started his fly shop The Troutsman in Traverse City, Michigan, in 1981. He continued to run The Troutsman until the spring of 2002 when he moved to Montana. He is an author and lecturer. His books are Modern Streamers for Trophy Trout (co-authored with Bob Linsenman) and Cripples and Spinners. Kelly has been published by virtually every major magazine in the business and is Editor-at-Large for Fly Fisherman Magazine. Kelly is also one of the hosts of Fly Fish TV on the Outdoor Life Network.

Recipe:

• Hook: 14-18 dry
• Thread: GSP 200
• Tail: Antron
• Body: Superfine Dub
• Wing: Antron and Natural Deer
• Legs: Small round rubber

Dan Delekta started Fly fishing when he was ten years old, encouraged by his dad, who owned sporting goods stores in upstate New York. Dan grew up fishing in the Adirondack Mountains. His passion for trout and steelhead fly fishing eventually led him far from New York, to Montana, Idaho, Wyoming, Washington, Oregon, and British Columbia. He moved to West Yellowstone at age 22.

Dan began tying flies when he was ten years old. He has designed over 200 patterns of flies that are the trademark Delektable™ collection utilizing both traditional and new age materials. His fly patterns are now tied by Riverborn Fly Company in Boise Idaho and supplied nationally. His passion for fly tying is as strong now as it has ever been. He is constantly thinking about, designing, tying, and field testing his new designs in the great Madison River just outside his door and other rivers he guides including the Big Hole, Beaverhead, Ruby, Missouri, Stillwater, Yellowstone, and Big Horn Rivers. Dan loves to make stuff and started building rods in 1975. He now constructs custom graphite, fiberglass, and bamboo rods at the shop. He started Beartooth Flyfishing in 1982, constructing Made in Montana braided leaders, hand-tied leaders, and fly rods.

Dan has access to an apartment, car, and flats boat on Andros Island in the Bahamas. He spends a good amount of winter time fishing the salt for Bonefish and many other saltwater species. He has an opportunity to design and test his saltwater patterns while on Andros Island.

Dan has guided in Montana’s trophy rivers for over 25 years. He built the Beartooth Flyfishing lodge in 1989, with the help of friends. He greatly values the friendships he has built over the years. His love of the mountains, the solitude, and the peace is exceeded by his appreciation of all the people who have treated him like family. Dan loves fly fishing and all the challenges and rewards it brings. He looks forward to continuing to innovate, to being in touch with nature, and to continuing to bring the joys of fly fishing and deeper knowledge of fly fishing to even more people.

RECIPE

• Hook: Streamer #6, #8, #10
• Thread: Black 6/0 Danville
• Bead: Copper
• Tail: Dyed Grizzly Brown Marabou
• Body: Peacock Herl
• Rib: Copper Wire
• Weight: .030 tin along side of hook shank
• Legs: Silly barred pumpkin/green
• Antennae: White Goose Biot
• Hackle: Dark Brown Speckled Hen Back
• Head: Ice Dub Peacock

EDIT: If you like Kelly's tying you might be interested in the Free Hi Definition Downloads we are giving away. He is one of the three tyers we are highlighting on our store for our 101st post!

Kelly has been a fly fishing guide for 27 years. He started guiding in Michigan at the age of 16. He started his fly shop The Troutsman in Traverse City, Michigan, in 1981. He continued to run The Troutsman until the spring of 2002 when he moved to Montana. He is an author and lecturer. His books are Modern Streamers for Trophy Trout (co-authored with Bob Linsenman) and Cripples and Spinners. Kelly has been published by virtually every major magazine in the business and is Editor-at-Large for Fly Fisherman Magazine. Kelly is also one of the hosts of Fly Fish TV on the Outdoor Life Network.

Recipe:

• Hook: 12-16 200r
• Thread: Wine 6/0
• Tail: Ostrich Plume - 3.
• Body: Brown, Tan, Gray hares dub or squirrel dub.
• Thorax: Pheasant Tail with small gold wire rib
• Wing: wing case same as thorax

James Warren has been tying commercially since he was 12 years old. He has guided for 9 years and fished all over the world.

Recipe:

• Hook: Stainless Steel 1/0
• Thread: Gray 3/0
• Tail: Equal parts white and gray Ice Fur or similar product (ep fibers, fishhair, ect). Tie in with darker color in the dorsal position.
• Body: Pearl Cactus chenille or similar. Webby grizzly hackle palmered up body, longest hackle to the front.
• Head: Gray 1/8” fly foam

See more of James' patterns by selecting him from the categories at the right or by Clicking HERE.

Doug puts the weight on in this heavy multi purpose fly.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

RECIPE:

• Hook: Std Saltwater #2-8
• Thread: UTC 140 color to suit
• Eyes: Bead chain
• Wing: Polar fiber color to suit, spanflex, flash
• Legs: spanflex, colored with permanent marker
• Head: Antron Crystal chenille, color and size to suit

Josh Stanish is a tyer from Bozeman, MT. Find out more about Josh by going to Biggie's Bugs or to www.montanatroutchasers.com

Josh grew up in the mountains of Colorado and watched a world class resort grow from the ground up. His passion for fishing got started at a young age when his father would take him camping in the flat top wilderness. When he was about 10 he found an old spin/flyfish combo rod and headed to the river. He has been completely consumed with the sport ever since. Upon graduating High School he headed north to the great state of Montana. He attended college between his days on the Madison, Yellowstone and Gallatin Rivers.

Recipe

• Hook: 3x Long streamer hook # 6-10
• Thread: 140 Denier UTC thread
• Antennae: Pheasant tail fibers and black round rubber
• Wingcase: Turkey feathers
• Claws: Filoplume feathers from saddle hackle
• Body: Ice dub chennille (Tan)
• Ribbing: Medium wire (copper)
• Hackle: Ginger saddle

For More of Josh's patterns click on Josh Stanish.

Click for more Streamer recipes.

James Warren has been tying commercially since he was 12 years old. He has guided for 9 years and fished all over the world.

Recipe:

• Hook: Any stainless saltwater hook, size 8 – 2 to match conditions
• Thread: 6/0 pink
• Eyes: Dumbbell eyes to match water depth. Tie pattern blind (no eyes), or with different size eyes to match the conditions you are fishing.
• Tail: n/a although original pattern calls for a tail of unraveled body material.
• Body: Pearl Frostbite or any other small diameter mylar wrapping material
• Wing: Super Gotcha Ice Fur

See more of James' patterns by selecting him from the categories at the right or by Clicking HERE.

Doug puts the weight on in this heave multi purpose fly.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

RECIPE:

• Hook: Mustad #34011 stainless long shank #1/0-6
• Thread: UTC 140 color to suit
• Weight: .010-.025 lead wire
• Eyes: black Laquer applied with a toothpick
• Tail: Rabbit fur, flash, sili legs
• Body: Brassie size ultra wire, epoxy, glitter, model paint; Epoxy turner is handy for this one

Josh Stanish is a tyer from Bozeman, MT. Find out more about Josh by going to Biggie's Bugs or to www.montanatroutchasers.com

Josh grew up in the mountains of Colorado and watched a world class resort grow from the ground up. His passion for fishing got started at a young age when his father would take him camping in the flat top wilderness. When he was about 10 he found an old spin/flyfish combo rod and headed to the river. He has been completely consumed with the sport ever since. Upon graduating High School he headed north to the great state of Montana. He attended college between his days on the Madison, Yellowstone and Gallatin Rivers.

Recipe
This video is also available for Download at full resolution.

• Hook: Standard or straight eye Dry fly Hook (TMC 101) #14-20
• Thread: 70 Denier UTC Thread, Color to match
• Tail: Light Dun Micro Fibbets
• Body: Superfine Dubbing (PMD)
• Wing: Light Dun snowshoe rabbit foot.

For More of Josh's patterns click on Josh Stanish.

For more Dry Fly Recipes click on Dry Flies

James Warren has been tying commercially since he was 12 years old. He has guided for 9 years and fished all over the world.

Recipe:

• Hook: Stainless Steel, Size 2
• Thread: Chartreuse 6/0
• Eyes: Lead eyes, zap a gapped to hook
• Tail: Tan marabou tips, grizzly hackle tips, 2 – 4 strands tan midge flash per side on tail
• Body: Chartreuse Ice Fur

See more of James' patterns by selecting him from the categories at the right or by Clicking HERE.

This video is available as an HIGH QUALITY DOWNLOAD from our store!

Doug puts the weight on in this heave multi purpose fly.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

Recipe:

• Hook: Bass bug hook, or standard saltwater hook.
• Thread: Flat waxed nylon white
• Tail: 3 or four pairs of wide webby Rooster neck hackle, white, brown, yellow dyed grizzly, crystal flash
• Head/Body: Deer belly Hair white; Deer body hair, brown, Black
• Legs: 3 or 4 medium round rubber legs yellow
• Eyes: Medium doll eyes
• Weedguard: 20# hard mono

Additional notes: coat front of popper with a flexible adhesive like clear Silicone, it makes the popper make more noise and "pop" better.

• This video is also available as an HD Download from our store.

Josh Stanish is a tyer from Bozeman, MT. Find out more about Josh by going to Biggie's Bugs or to www.montanatroutchasers.com

Josh grew up in the mountains of Colorado and watched a world class resort grow from the ground up. His passion for fishing got started at a young age when his father would take him camping in the flat top wilderness. When he was about 10 he found an old spin/flyfish combo rod and headed to the river. He has been completely consumed with the sport ever since. Upon graduating High School he headed north to the great state of Montana. He attended college between his days on the Madison, Yellowstone and Gallatin Rivers.

Recipe

• Hook: 3x long nymph or streamer hook. # 4-10
• Thread: 140 Denier UTC thread, color to match body
• Tail: 6-10 strands of Krystal Flash
• Dubbing: Amber Super Bright dubbing
• Overbody: Tan 2mm foam
• Wings: White Gator Hair or Poly Yarn
• Legs: Pumpkin Sili Legs or Flex Floss

NEWS: Don't forget to register to win a FREE DVD of recipes of your choice! Read MORE.

• This video is also available as an HD Download from our store.

James Warren has been tying commercially since he was 12 years old. He has guided for 9 years and fished all over the world.

Recipe:

• Hook: Any streamer hook. Stainless steel for saltwater.
• Thread: Fine mono
• Eyes: Lead or dumbbell eyes to match fishing conditions and water depth. Use zap-a-gap to secure to hook prior to tying
• Body: White and pink Ice Fur or similar synthetic. Bucktail also works very well and was the original material.

NEWS: Don't forget to register to win a FREE DVD of recipes of your choice! Read MORE.

Doug puts the weight on in this heave multi purpose fly.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

RECIPE:

• Hook: Std. Saltwater #2-6
• Thread: UTC 140 color to suit
• Weight: Lead or bead chain eyes to suit
• Eyes: glass bead on #16 mono, dipped in epoxy
• Tail: craft fur, spanflex, krystal flash
• Body: sparkle yarn, colors to suit
• Wing: craft fur, krystal flash
• Legs: spanflex
• Weed guard: 12-16# hard mono

NEWS: Don't forget to register to win a FREE DVD of recipes of your choice! Read MORE.

• This video is also available as an HD Download at our store.

Josh Stanish is a tyer from Bozeman, MT. Find out more about Josh by going to Biggie's Bugs or to www.montanatroutchasers.com

Josh grew up in the mountains of Colorado and watched a world class resort grow from the ground up. His passion for fishing got started at a young age when his father would take him camping in the flat top wilderness. When he was about 10 he found an old spin/flyfish combo rod and headed to the river. He has been completely consumed with the sport ever since. Upon graduating High School he headed north to the great state of Montana. He attended college between his days on the Madison, Yellowstone and Gallatin Rivers.

Recipe

• Hook: 2x Long Nymph Hook # 2-6
• Bead: 1/4" Spirit River Brite Beads
• weight: Size .030 lead wire
• Thread: Flat wax nylon (Black)
• Tail: Brown Goose Biots
• Body: Ice Dub Chenille (Black)
• Collar: Brown Schapplen
• Wings; White Goose Biots

Don't forget to Register or sign up for an RSS feed to automatically get notified of new patterns and recipes.

Click the link or go to the categories menu to the right for more of Josh's Patterns.

Also Check out the Video Shop page for DVDs.

RECIPE

• Hook: Mustad 1x 3906b #12-#18 (any nymph type hook will work)
• Bead: Gold to match hook size
• Weight: 4 or 5 turns of lead wire to secure bead
• Thread: 6/0 Danville prewaxed coffee or beige
• Tail: Guard hair from Hare's mask or fox squirrel (optional: Two strands of pearl krystal flash)
• Body: Light hare's mask dubbing(in lieu of original "Frisky" cat hair)
• Rib: one strand of pearl krystal flash reinforced with monofilament wrapped in opposite direction

Jay Buchner was born and raised in eastern Iowa, and spent a great deal of his childhood on family fishing excursions to Michigan and Ontario, Canada. He learned to tie flies at age 8 from his grandfather.

His fishing experience covers the gamut, from bait fishing for catfish in the Maquoketa and Mississippi rivers, to plug fishing and fly fishing for Northern pike and Smallmouth Bass in the lakes of Canada, to fly fishing for trout in the cold waters of Australia, New Zealand, Poland, Czech Republic, and England, Sweden, France, Spain, Slovakia, Portugal, Finland and tigerfishing in the Zambezi river of Africa.

After moving to Jackson, Wyoming, in the late 60's, Jay turned his love of fishing into a career, guiding fisher people in the Jackson Hole area for nearly 35 years and owning and operating both a retail mail order fly fishing catalog and a fly fishing shop in Jackson.

For several years, Jay and Don Veirs, an entomologist from Logan, Utah, have taught Fly Fishing Entomology through the Teton Science School in Kelly, Wyoming. The class includes field work as well as lab work in identifying aquatic trout foods, fly tying demonstrations relating fly patterns to the "real thing," and fishing opportunities which put to practical use the knowledge learned about the insects and their life cycles.

Jay and his wife, Kathy, have one daughter, Chani, who is now 28 years of age. She enjoys her opportunities to go fly fishing with friends or family whenever she can.

The Buchners have been involved with Trout Unlimited and the Federation of Fly Fishers for many years, attending Conclaves, conventions and the like, demonstrating fly tying and promoting their various business adventures.

Their fly patterns and tying techniques have been featured in such publications as The Second Fly Tyer's Almanac (Boyle & Whitlock), The Book of Fly Patterns (Leiser), Tying Flies with Jack Dennis and Friends (Dennis), Fly Tyer magazine, Fly Fisherman magazine and American Angler magazine.

Articles and photographs by the Buchners have also appeared in numerous fishing and outdoor magazines, such as Fly Fisherman, Fly Tyer, American Angler, Backpacker, Mountain Bike, and the Scientific Anglers Handbooks.

Apologies. This was not working for a time but should now be viewable. Thanks for your patience and Thanks to Cole M. for letting us know. -Henry

For the last ten years, Steve has demonstrated his tying skills in Oregon,
Idaho, Montana and California at Federation of Fly Fishing events. He has
tied at the International sportsman's Expositions in Sacramento, San Mateo
and Pleasanton, California. Steve has also tied at the Fly Fishing Show in
San Rafael, California.

Steve enjoys fly fishing the California Delta for Largemouth and Striped
Bass. He also takes pleasure in fishing the neighboring Sierra's for
various species of trout. He is a member of the Tracy Fly Fishers, enjoying
the club functions, speakers and the camaraderie of its members. He is a
proud member of the Whiting and Daiichi Pro Teams.

RECIPE:

• Hook: Daiichi 2546
• Thread: Gudebrod GX2 or Danville's Flat Waxed Nylon 210 Denier
• Body: SF blend White Botton, Tan Top
• Head: Stacked Deer Hair or Cow Elk Whit on Bottom, Tan top

Try out George Anderson's Terminal Tactics DVD for Knots and tactics

Don't forget to sign up for our RSS Feed and to register a user account.

Howard Cole started fly fishing over 35 years ago and has been tying flies nearly as long. He has tied flies at numerous events including the Federation of Fly Fishermen Conclave and the Eastern Idaho Fly Tying Expo. Some of his original flies have been published in books like Emergers and Flies of the West. He currently lives with his wife and daughter in Jackson Hole, Wyoming and where he is co-owner of High Country Flies.

Cole says: “Living in the Yellowstone Area, I never take for granted having one of the world’s most diverse trout fisheries right in my backyard. The plain truth is: Trout live in the most beautiful places. Simply observing the subtle rings left by a rising fish, rouses the same emotion that I had when I first came to this sport.”
Please take a look at Howard's site: http://www.flyfishingjacksonhole.com for trips, gear, and info as well as flies and fly tying materials.

RECIPE:

• Hook: Tiemco 5212BL #12-#16
• Thread: Uni-Thread 8/0 Tan
• Undertail: Z-lon Amber
• Tail: Wood Duck Flank Fibers
• Abdomen: 1/3 Dubbing Flourescent Orange 2/3 Dubbing Creamy Yellow
• Wing: Z-lon Dun
• Thorax: Dubbing Creamy Yellow
• Hackle: CDC Light Dun
• Wing Case: Ethafoam Thin

"I believe the Flourescent Orange Butt of this fly is a Hot Spot or Trigger Mechanism to trout. I have fished this fly with and without the Orange Butt and swear the fly fishes better with it. One of the little known riddles to many Fly Fishermen is not all Stoneflies crawl out of the water and hatch on land. Like Mayflies and Caddis, some Stoneflies actually hatch in the water. The Little Yellow Sally (Isoperla) is one of them. Sometimes, matching the emerging lifecycle stage of this insect can be invaluable. Most of the waters in the Yellowstone area will harbor this insect, but on waters like the South Fork, Madison, Firehole, and Yellowstone this bug can be extremely important with prolific hatches. "

- Howard Cole

Gary Jones retired from advertising several years ago and now spends his days tying flies, fishing blue ribbon trout streams and working at Greater Yellowstone Fly Fishers just outside of Bozeman, MT. In this pattern, he shows the very interesting yet simple technique for tying a woven stonefly pattern.

This video is available as an HD DOWNLOAD from our store!

For the last ten years, Steve has demonstrated his tying skills in Oregon,
Idaho, Montana and California at Federation of Fly Fishing events. He has
tied at the International sportsman's Expositions in Sacramento, San Mateo
and Pleasanton, California. Steve has also tied at the Fly Fishing Show in
San Rafael, California.

Steve enjoys fly fishing the California Delta for Largemouth and Striped
Bass. He also takes pleasure in fishing the neighboring Sierra's for
various species of trout. He is a member of the Tracy Fly Fishers, enjoying
the club functions, speakers and the camaraderie of its members. He is a
proud member of the Whiting and Daiichi Pro Teams.

Recipe:

• Hook: Daiichi 2546
• Thread: Gudebrod GX2 or Danville's Flat Waxed Nylon 210 Denier
• Legs: Krystal Flash Pearl, Three or Four Whiting American Rooster Hackleplaced on each side of the hook away from each other.
• Head: Stacked Deer Hair or Cow Elk Your choice of colors. I like mellow natural colors

Doug puts the weight on in this heave multi purpose fly.

Livingston tier and guide Doug McKnight hails originally from Pensylvania, but now lives in Livingston, MT. He is currently a fly designer for Umpqua Feather Merchants and also creates beautiful display flies in custom shadow boxes.

If you would like to learn more about Doug's custom work you can reach him at dougmfish406@gmail.com or by calling him at George Anderson's Yellowstone Angler at (406) 222-7130.

RECIPE:

• Hook: 4x-6x long Streamer hook
• Thread: UTC 140
• Eyes: Lead Dumbbell eyes
• Tail: Brown and Burnt Umber Marabou
• Legs: Tan speckled rubber legs
• Body: Woodchuck Hair spun into a loop of Med. gauge wire

For updates on new patterns each week try signing up for our RSS Feed. Its simpler than it sounds!

In this pattern, US Fly Fishing Team Member Jay Buchner demonstrates just how to tie knots in feathers to create hopper legs.

RECIPE

• Hook: Mustad 9671, Dai Riki 280
• Thread: 3/0 mono to match body color
• Tail: Dyed red Elk
• Body: Polypropolene Yarn
• Hackle: Brown or badger
• UnderWing: deer hair
• OverWing: Turkey tail sprayed with urethane
• Legs: Golden pheasant tail fibers knotted
• Head: Deer Hair Spun in 2 bunches

Jay Buchner was born and raised in eastern Iowa, and spent a great deal of his childhood on family fishing excursions to Michigan and Ontario, Canada. He learned to tie flies at age 8 from his grandfather.

His fishing experience covers the gamut, from bait fishing for catfish in the Maquoketa and Mississippi rivers, to plug fishing and fly fishing for Northern pike and Smallmouth Bass in the lakes of Canada, to fly fishing for trout in the cold waters of Australia, New Zealand, Poland, Czech Republic, and England, Sweden, France, Spain, Slovakia, Portugal, Finland and tigerfishing in the Zambezi river of Africa.

After moving to Jackson, Wyoming, in the late 60's, Jay turned his love of fishing into a career, guiding fisher people in the Jackson Hole area for nearly 35 years and owning and operating both a retail mail order fly fishing catalog and a fly fishing shop in Jackson.

For several years, Jay and Don Veirs, an entomologist from Logan, Utah, have taught Fly Fishing Entomology through the Teton Science School in Kelly, Wyoming. The class includes field work as well as lab work in identifying aquatic trout foods, fly tying demonstrations relating fly patterns to the "real thing," and fishing opportunities which put to practical use the knowledge learned about the insects and their life cycles.

Jay and his wife, Kathy, have one daughter, Chani, who is now 28 years of age. She enjoys her opportunities to go fly fishing with friends or family whenever she can.

The Buchners have been involved with Trout Unlimited and the Federation of Fly Fishers for many years, attending Conclaves, conventions and the like, demonstrating fly tying and promoting their various business adventures.

Their fly patterns and tying techniques have been featured in such publications as The Second Fly Tyer's Almanac (Boyle & Whitlock), The Book of Fly Patterns (Leiser), Tying Flies with Jack Dennis and Friends (Dennis), Fly Tyer magazine, Fly Fisherman magazine and American Angler magazine.

Articles and photographs by the Buchners have also appeared in numerous fishing and outdoor magazines, such as Fly Fisherman, Fly Tyer, American Angler, Backpacker, Mountain Bike, and the Scientific Anglers Handbooks.

Howard Cole started fly fishing over 35 years ago and has been tying flies nearly as long. He has tied flies at numerous events including the Federation of Fly Fishermen Conclave and the Eastern Idaho Fly Tying Expo. Some of his original flies have been published in books like Emergers and Flies of the West. He currently lives with his wife and daughter in Jackson Hole, Wyoming and where he is co-owner of High Country Flies.

Cole says: “Living in the Yellowstone Area, I never take for granted having one of the world’s most diverse trout fisheries right in my backyard. The plain truth is: Trout live in the most beautiful places. Simply observing the subtle rings left by a rising fish, rouses the same emotion that I had when I first came to this sport.”
Please take a look at Howard's site: http://www.flyfishingjacksonhole.com for trips, gear, and info as well as flies and fly tying materials.

Recipe:

• Hook: Tiemco 900BL #12 & #14
• Thread: Uni-Thread 8/0 Gray
• Tail: Micro-Fibetts Brown or Dark Dun
• Underbody: Gray Thread
• Body: Flexi-Floss Brown or Super Floss Brown
• Wing: Teal Flank Fibers
• Hackle: Sadddle or Cape Hackle Cree

An aspect that makes this fly unique is how the body is formed. Make a smooth tapered Underbody with the Gray Thread. Then over the top, Palmer the Flexi-Floss forward evenly and leave a space between each wrap. This will present a ribbed effect from the Gray Thread, giving the body segmented look. Though Western March Browns (also referred to as Rhithrogena or Rhiths) are the first large mayfly of the season, they are a fickle insect. A lot of our western waters have this mayfly, but some years the hatch can be insignificant while others years quite memorable. Year after year the Bitterroot, Clark Fork, and Yakima normally have consistent hatches. Commonly this mayfly is found in faster sections of rivers and streams. Also, generally it takes awhile for the fish to turn on to the adults but once they do they can really key in on this insect.

James Warren has been tying commercially since he was 12 years old. He has guided for 9 years and fished all over the world. His Billfish Popper pattern is simple and cheap and worth a watch.

Recipe:
This video is now available as an HD DOWNLOAD!

• Hook: Owner AKI 6/0 (two hooks)
• Eyes: 1/2" Silver Prismatic Stick on
• Tail: Yellow, Chartreuse, Turquoise, Green Griz Schlappen
• Head: Foam Cylendar, Gold Tape, Pantone Markers

RECIPE

• Hook: Standard Dry Fly #14-#18
• Thread: 6/0 Danville Gray or to match Body
• Body: 3-4 strands goose wing quill or other wing quill in natural or dyed colors
• Wing: 2 Rooster or Hen body feathers
• Hackle: Dun Hackle or to match body or wing color, over size one over hook size

Jay Buchner was born and raised in eastern Iowa, and spent a great deal of his childhood on family fishing excursions to Michigan and Ontario, Canada. He learned to tie flies at age 8 from his grandfather.

His fishing experience covers the gamut, from bait fishing for catfish in the Maquoketa and Mississippi rivers, to plug fishing and fly fishing for Northern pike and Smallmouth Bass in the lakes of Canada, to fly fishing for trout in the cold waters of Australia, New Zealand, Poland, Czech Republic, and England, Sweden, France, Spain, Slovakia, Portugal, Finland and tigerfishing in the Zambezi river of Africa.

After moving to Jackson, Wyoming, in the late 60's, Jay turned his love of fishing into a career, guiding fisher people in the Jackson Hole area for nearly 35 years and owning and operating both a retail mail order fly fishing catalog and a fly fishing shop in Jackson.

For several years, Jay and Don Veirs, an entomologist from Logan, Utah, have taught Fly Fishing Entomology through the Teton Science School in Kelly, Wyoming. The class includes field work as well as lab work in identifying aquatic trout foods, fly tying demonstrations relating fly patterns to the "real thing," and fishing opportunities which put to practical use the knowledge learned about the insects and their life cycles.

Jay and his wife, Kathy, have one daughter, Chani, who is now 28 years of age. She enjoys her opportunities to go fly fishing with friends or family whenever she can.

The Buchners have been involved with Trout Unlimited and the Federation of Fly Fishers for many years, attending Conclaves, conventions and the like, demonstrating fly tying and promoting their various business adventures.

Their fly patterns and tying techniques have been featured in such publications as The Second Fly Tyer's Almanac (Boyle & Whitlock), The Book of Fly Patterns (Leiser), Tying Flies with Jack Dennis and Friends (Dennis), Fly Tyer magazine, Fly Fisherman magazine and American Angler magazine.

Articles and photographs by the Buchners have also appeared in numerous fishing and outdoor magazines, such as Fly Fisherman, Fly Tyer, American Angler, Backpacker, Mountain Bike, and the Scientific Anglers Handbooks.

Howard Cole started fly fishing over 35 years ago and has been tying flies nearly as long. He has tied flies at numerous events including the Federation of Fly Fishermen Conclave and the Eastern Idaho Fly Tying Expo. Some of his original flies have been published in books like Emergers and Flies of the West. He currently lives with his wife and daughter in Jackson Hole, Wyoming and where he is co-owner of High Country Flies.

Cole says: “Living in the Yellowstone Area, I never take for granted having one of the world’s most diverse trout fisheries right in my backyard. The plain truth is: Trout live in the most beautiful places. Simply observing the subtle rings left by a rising fish, rouses the same emotion that I had when I first came to this sport.”
Please take a look at Howard's site: http://www.flyfishingjacksonhole.com for trips, gear, and info as well as flies and fly tying materials.

Recipe:

• Hook: Dai-Riki 300 #14 & #16
• Thread: Uni-Thread 8/0 Olive Dun
• Undertail: Z-lon Amber or CDC Gold/ Amber
• Tail: Wood Duck Flank Fibers
• Abdomen: Goose or Turkey Biot Olive
• Thorax: Dubbing Dark Olive
• Wing: Snowshoe Rabbit Dark Dun
• Hackle: Sadddle or Cape Hackle Grizzly/Olive

Even thought this fly rides low in the surface film, it is an extremely visible fly for the fisherman. And by changing material color or substituting different materials it is an emerger pattern that can imitate the many categories of mayflies.

Kieran Frye has been tying flies since 1981. He is an award winning tyer, including the 1994 Mustad Scandinavian Open held in Oslo, Norway. Many of Kieran's patterns were developed during his days afield in his home state of Pennsylvania.

Recipe:

• Hook: Mustad Midge Hook
• Thread: 8/0 Uni Black
• Body: Blue or Bronze part of the peacock "eye"
• Thorax: Black Dubbing

For KC's Emerger or KC's Henryville Special or KC's Stonefly click on the link or go to the categories section to the right.

For updates on new patterns each week try signing up for our RSS Feed. Its simpler than it sounds!

This pattern is especially interesting because it was invented by his father.

Boots Allen is a third generation guide and outfitter from Western Wyoming. Over the last 18 years, he has had the opportunity to fish and guide at destinations around the world, including Argentina, Russia, Mongolia, Kazakhstan, Costa Rica, British Columbia, and the streams of the Rocky Mountain West. He has pened numerous articles for fly fishing magazines such as Fly Tyer, The Fly Fishing and Tying Journal, The Drake, and Sports Afield. Boots has used his creations at the fly tying vise for a variety of game fish including taimen, pike, lenok, sea-run brown trout, steelhead, pacific salmon, snook, roosterfish, redfish, and almost every imaginable species of trout.

Recipe:

• Hook: Any standard dry fly hook, sizes 6 to 10.
• Thread: Yellow, orange, green, or red 3/0 flat wax.
• Tail and Body: Mule deer hair from the neck and facial area.
• Hackle: Fine grizzly hackle. I typically will use silver or gold label hackle from Whiting Farms.

Also see other flies by Boots.